Notice

New Media API EndpointPull newly uploaded firearm images and rendersAll Media API Endpoint

Category
Submachine Gun
Barrel
212 mm
Weight, empty
3.35 kg
Introduced
1960

About

What it is, and why it matters

Copy a link to this section

The Akaba is a simplified, cost-reduced Egyptian submachine gun derived from the Carl Gustaf m/45 'Swedish K', produced by the Maadi Company (Factory 54) alongside the more faithful Port Said copy. A 9x19mm Parabellum, open-bolt, simple-blowback weapon, the Akaba discards the m/45's barrel jacket, replaces the side-folding tubular butt with a telescoping steel-wire stock, and uses a fixed non-adjustable aperture rear sight. It feeds from the same 36-round double-column box magazine and fires full-automatic only.

Where the Port Said was Egypt's faithful clone of the Swedish K, the Akaba was the no-frills field gun: same internals and magazine, but with the barrel jacket and adjustable sights thrown out and a bent steel-wire stock in place of the original folding butt.

The Akaba is the austere version of Egypt's Swedish K family: where the Port Said reproduces the m/45 faithfully, the Akaba is roughly finished and stripped of the barrel jacket and adjustable sights to lower cost. Both served the Egyptian military through the Arab-Israeli wars before being supplanted by AK-pattern weapons.

Specification

Everything measured

Copy a link to this section

IdentityWhat it is, who built it and when.

Manufacturer
Factory 54 (Maadi Company for Engineering Industries)
Category
Submachine Gun
Country
Egypt
Status
Out of production
Produced
1960 to 1980
Variant of
Simplified

DimensionsAs issued, without a magazine or an optic.

Barrel
212 mm
Overall length
808 mm
Weight, empty
3.35 kg

ActionHow it cycles, what trips it, and what feeds it.

Action
Blowback
Firing mechanism
Hammer fired
Trigger
Single stage
Capacity
36
Magazine
Detachable box

MaterialsEach swatch is the material itself, not a colour chosen to stand for it.

Frame
Steel
Slide
Steel
Barrel
Steel
Stock
Steel
Finish
Phosphate

BallisticsFrom the service cartridge, not a handload.

Muzzle velocity
425 m/s
Muzzle energy
481 J
Effective range
200 m
Maximum range
250 m
Rate of fire
600 rpm

Trajectory

What the round does downrange

Solved from the muzzle figures and the bullet. The dashed rule is the effective range on the record, and the crosses are the steps the solver returned.

Copy a link to this section

0 m411 m/s

0125250375500201 m0501002003004005006008001000

Features

What it has

What the record lists as fitted, drawn from the catalogue.

Copy a link to this section
  • Open bolt
  • No barrel jacket
  • Telescoping wire stock
  • Fixed aperture sight
  • Double column double feed magazine
  • Tubular receiver

Standing

How it compares

Copy a link to this section

Each figure against the firearms of the same type and cartridge that record it, or of the same type where that cartridge has too few. Positions are read to the nearest tenth.

MeasurementThis firearmMedianPosition
Empty weightAmong 201 9x19mm Parabellum submachine guns3.35 kg3.18 kgHeavier than about 60%
Overall lengthAmong 200 9x19mm Parabellum submachine guns808 mm723 mmLonger than about 70%
Barrel lengthAmong 202 9x19mm Parabellum submachine guns212 mm213 mmNear the median
Magazine capacityAmong 204 9x19mm Parabellum submachine guns3632Holds more rounds than about 80%

Answers

Questions about the Akaba

Copy a link to this section
How much does the Akaba weigh?

The Akaba weighs 3.35 kg (7.39 lb) empty.

What caliber is the Akaba?

The Akaba is chambered in 9x19mm Parabellum.

How many rounds does the Akaba hold?

The Akaba holds 36 rounds, fed from a detachable box magazine.

How long is the Akaba?

The Akaba is 808 mm (31.8 in) long overall, with a 212 mm (8.35 in) barrel.

Who makes the Akaba?

The Akaba is made by Factory 54 (Maadi Company for Engineering Industries) (Egypt).

When was the Akaba introduced?

The Akaba was introduced in 1960 and discontinued in 1980.

How does the Akaba operate?

The Akaba uses a blowback action, and its firing mechanism is hammer fired.

Compatibility

Which parts fit this firearm

Copy a link to this section

Studio

Every part that mounts on this, resolved

Not a list the maker typed out: the answer comes from the mounts this firearm exposes and the interface each part needs, so it stays right when either one changes.

  • Every part that mounts on any firearm in the catalogue
  • Interface standards, platforms and fit overrides
  • The same answers through the API and the MCP server

Requires a signed-in GunSpec account on the Studio plan. The answer is computed per part, so it is not part of the public record.

Provenance

What the record holds

Every figure above was taken from one of these pages. The confidence reflects how much of the record came from a page a claim can be checked against.

Copy a link to this section

In service

Egyptian Armed Forces
1960
Egyptian Police
Egypt

Provenance

Confidence in this record

60%

Stockists

Where to buy

Offers link straight to the shop. GunSpec never takes the order.

Copy a link to this section

No shop has listed this firearm yet

Stock and prices come from the shops themselves. If you sell this firearm, you can list it and it appears here.

List a firearm

MCP

Ask an assistant about it

The same record, reached the way a person asks for it rather than the way a program does.

Copy a link to this section

Ask GunSpec

Works with

Claude CodeClaude DesktopCursorVS CodeGitHub CopilotWindsurf

Point an MCP client at GunSpec and it answers from the catalogue rather than from memory. A free key covers the read tools.

API

The call that returns this record

The same fields, in the same units, from the same endpoint the page reads.

Copy a link to this section
curl --request GET \  --url 'https://api.gunspec.io/v1/firearms/akaba' \  --header 'X-API-Key: your_key'
Response
{  "id": "akaba",  "name": "Akaba",  "manufacturer": {    "id": "factory-54",    "name": "Factory 54 (Maadi Company for Engineering Industries)",    "countryCode": "EG",    "foundedYear": 1954,    "website": null,    "logoUrl": null,    "description": null,    "status": null,    "defunctYear": null,    "stateOwned": null,    "makesFirearms": null,    "parentId": null,    "predecessorId": null,    "createdAt": "2026-05-04 12:38:54",    "updatedAt": "2026-05-04 12:38:54",    "version": "ad404316ffc2b281a1f18c2a67057f3e329ca70a28007a0f17e1db7f9ffbe736"  },  "category": {    "id": "submachine-gun",    "name": "Submachine Gun",    "description": "Automatic firearms chambered in pistol calibers"  },  "country_of_origin": "EG",  "year_introduced": 1960,  "barrel_length_mm": 212,  "weight_empty_g": 3350,  "action_type": "blowback"}