Notice

New Media API EndpointPull newly uploaded firearm images and rendersAll Media API Endpoint

Armaguerra OG-43

Category
Submachine Gun
Barrel
Not recorded
Weight, empty
3.18 kg
Introduced
1943

About

What it is, and why it matters

Copy a link to this section

The Armaguerra OG-43 was an Italian 9x19mm Parabellum submachine gun designed by Giovanni Oliani and built in small numbers by Societa Anonima Revelli Manifattura Armi Guerra (Armaguerra) of Cremona in the Italian Social Republic during World War II. Of advanced stamped sheet-metal construction, it fired from an open bolt in both semi-automatic and full-automatic modes; the bulk of its L-shaped bolt and recoil spring were housed in a cylinder above the barrel, and the magazine housing doubled as the pistol grip. It fed from double-stack detachable box magazines of 10, 20, 30 or 40 rounds and used a forward-folding metal stock, with adjustable iron sights set for 100 or 200 meters.

The OG-43 was one of the earliest submachine guns to route its magazine up through the pistol grip - a compact layout that would later make the Israeli Uzi and Beretta Model 12 famous nearly two decades afterward.

Manufactured only in small numbers. The refined OG-44 variant used a more conventional fixed wooden stock attached to the pistol grip, was slightly heavier, and measured about 787 mm overall; its construction was approved by the Ministry of War but full production never began before the war ended. Muzzle velocity (~480 m/s) and rate of fire (~500 rpm) are approximate figures from period sources.

Specification

Everything measured

Copy a link to this section

IdentityWhat it is, who built it and when.

Manufacturer
Societa Anonima Revelli Manifattura Armi Guerra
Category
Submachine Gun
Country
Italy
Status
Out of production
Produced
1943 to 1945

DimensionsAs issued, without a magazine or an optic.

Overall length
720 mm
Weight, empty
3.18 kg

ActionHow it cycles, what trips it, and what feeds it.

Action
Blowback
Firing mechanism
Open bolt
Trigger
Single stage
Capacity
40
Magazine
Detachable box

MaterialsEach swatch is the material itself, not a colour chosen to stand for it.

Frame
Steel
Barrel
Steel
Stock
Steel

BallisticsFrom the service cartridge, not a handload.

Muzzle velocity
480 m/s
Effective range
150 m
Maximum range
200 m
Rate of fire
500 rpm

Trajectory

What the round does downrange

Solved from the muzzle figures and the bullet. The dashed rule is the effective range on the record, and the crosses are the steps the solver returned.

Copy a link to this section

No load solved for this record yetThe flight path is computed from a cartridge and a bullet. This record has no ammunition filed against its chambering, so there is nothing to solve.

Features

What it has

What the record lists as fitted, drawn from the catalogue.

Copy a link to this section
  • Magazine housing serves as pistol grip
  • Stamped sheet metal construction
  • L shaped bolt and recoil spring in cylinder above barrel
  • Open bolt operation
  • Forward folding metal stock
  • Adjustable iron sights 100 200m
  • Select fire

Standing

How it compares

Copy a link to this section

Each figure against the firearms of the same type and cartridge that record it, or of the same type where that cartridge has too few. Positions are read to the nearest tenth.

MeasurementThis firearmMedianPosition
Empty weightAmong 201 9x19mm Parabellum submachine guns3.18 kg3.18 kgNear the median
Overall lengthAmong 200 9x19mm Parabellum submachine guns720 mm723 mmNear the median
Magazine capacityAmong 204 9x19mm Parabellum submachine guns4032Holds more rounds than about 90%

Answers

Questions about the Armaguerra OG-43

Copy a link to this section
How much does the Armaguerra OG-43 weigh?

The Armaguerra OG-43 weighs 3.18 kg (7.01 lb) empty.

What caliber is the Armaguerra OG-43?

The Armaguerra OG-43 is chambered in 9x19mm Parabellum.

How many rounds does the Armaguerra OG-43 hold?

The Armaguerra OG-43 holds 40 rounds, fed from a detachable box magazine.

How long is the Armaguerra OG-43?

The Armaguerra OG-43 is 720 mm (28.3 in) long overall.

Who makes the Armaguerra OG-43?

The Armaguerra OG-43 is made by Societa Anonima Revelli Manifattura Armi Guerra (Italy). It was designed by Giovanni Oliani.

When was the Armaguerra OG-43 introduced?

The Armaguerra OG-43 was introduced in 1943 and discontinued in 1945.

How does the Armaguerra OG-43 operate?

The Armaguerra OG-43 uses a blowback action, and its firing mechanism is open bolt.

Compatibility

Which parts fit this firearm

Copy a link to this section

Studio

Every part that mounts on this, resolved

Not a list the maker typed out: the answer comes from the mounts this firearm exposes and the interface each part needs, so it stays right when either one changes.

  • Every part that mounts on any firearm in the catalogue
  • Interface standards, platforms and fit overrides
  • The same answers through the API and the MCP server

Requires a signed-in GunSpec account on the Studio plan. The answer is computed per part, so it is not part of the public record.

Provenance

What the record holds

Every figure above was taken from one of these pages. The confidence reflects how much of the record came from a page a claim can be checked against.

Copy a link to this section

In service

Italian Social Republic (RSI)
1943

Provenance

Confidence in this record

62%

Stockists

Where to buy

Offers link straight to the shop. GunSpec never takes the order.

Copy a link to this section

No shop has listed this firearm yet

Stock and prices come from the shops themselves. If you sell this firearm, you can list it and it appears here.

List a firearm

MCP

Ask an assistant about it

The same record, reached the way a person asks for it rather than the way a program does.

Copy a link to this section

Ask GunSpec

Works with

Claude CodeClaude DesktopCursorVS CodeGitHub CopilotWindsurf

Point an MCP client at GunSpec and it answers from the catalogue rather than from memory. A free key covers the read tools.

API

The call that returns this record

The same fields, in the same units, from the same endpoint the page reads.

Copy a link to this section
curl --request GET \  --url 'https://api.gunspec.io/v1/firearms/armaguerra-og-43' \  --header 'X-API-Key: your_key'
Response
{  "id": "armaguerra-og-43",  "name": "Armaguerra OG-43",  "manufacturer": {    "id": "armaguerra",    "name": "Societa Anonima Revelli Manifattura Armi Guerra",    "countryCode": "IT",    "foundedYear": 1937,    "website": null,    "logoUrl": null,    "description": null,    "status": null,    "defunctYear": null,    "stateOwned": null,    "makesFirearms": null,    "parentId": null,    "predecessorId": null,    "createdAt": "2026-06-21 23:00:46",    "updatedAt": "2026-06-21 23:00:46",    "version": "8d782db1d8b308e0f97e04a8429edc2dc6674b17831aa2f74f8de8d720bc564a"  },  "category": {    "id": "submachine-gun",    "name": "Submachine Gun",    "description": "Automatic firearms chambered in pistol calibers"  },  "country_of_origin": "IT",  "year_introduced": 1943,  "barrel_length_mm": null,  "weight_empty_g": 3180,  "action_type": "blowback"}