Notice

New Media API EndpointPull newly uploaded firearm images and rendersAll Media API Endpoint

Ballard No. 5 Pacific

Category
Rifle
Barrel
762 mm
Weight, empty
4.99 kg
Introduced
1876

About

What it is, and why it matters

Copy a link to this section

The Ballard No. 5 Pacific is a single-shot, breech-loading falling-block rifle built on Charles Henry Ballard's 1861 patent and produced by Marlin Firearms of New Haven, Connecticut. Introduced around 1876 as the heavy buffalo and long-range model of the Marlin-Ballard line, the Pacific was fitted with a heavy octagon barrel of roughly 30 inches and chambered for powerful black-powder cartridges such as the .45-70 Government along with .44-77, .40-65 and other large calibers. Weighing between 10 and 12 pounds, it was worked by a finger lever that dropped the breechblock, used Marlin's automatic extractor, and commonly carried double-set triggers with provision for a long-range tang aperture sight, making it one of the principal rifles used to hunt buffalo on the American frontier.

Marketed as a buffalo and long-range rifle, the No. 5 Pacific's heavy octagon barrel and heavy black-powder chamberings made it a favorite of frontier market hunters and, in its target guise, of the long-range shooting matches that flourished in 1870s America.

The No. 5 Pacific sat at the heavy end of the New Ballard sporting family, above the lighter No. 1 Hunter's and below dedicated Schuetzen target models. Listed weights, barrel lengths and chamberings varied between individual guns; figures here reflect a typical .45-70 heavy-barrel example.

Specification

Everything measured

Copy a link to this section

IdentityWhat it is, who built it and when.

Manufacturer
Marlin Firearms
Category
Rifle
Country
United States
Status
Out of production
Produced
1876 to 1891
Variant of
Hunting

DimensionsAs issued, without a magazine or an optic.

Barrel
762 mm
Overall length
1220 mm
Weight, empty
4.99 kg

ActionHow it cycles, what trips it, and what feeds it.

Action
Falling block
Firing mechanism
Hammer fired
Trigger
Set trigger
Capacity
1
Magazine
Internal

MaterialsEach swatch is the material itself, not a colour chosen to stand for it.

Frame
Steel
Barrel
Steel
Stock
Wood
Finish
Blued

BallisticsFrom the service cartridge, not a handload.

Muzzle velocity
411 m/s
Muzzle energy
2215 J
Effective range
275 m
Maximum range
900 m
Rate of fire
8 rpm

Trajectory

What the round does downrange

Solved from the muzzle figures and the bullet. The dashed rule is the effective range on the record, and the crosses are the steps the solver returned.

Copy a link to this section

No load solved for this record yetThe flight path is computed from a cartridge and a bullet. This record has no ammunition filed against its chambering, so there is nothing to solve.

Features

What it has

What the record lists as fitted, drawn from the catalogue.

Copy a link to this section
  • Falling block action
  • Finger lever
  • Heavy octagon barrel
  • Automatic extractor
  • Double set triggers
  • Pistol grip stock
  • Long range tang sight ready

Standing

How it compares

Copy a link to this section

Each figure against the firearms of the same type and cartridge that record it, or of the same type where that cartridge has too few. Positions are read to the nearest tenth.

MeasurementThis firearmMedianPosition
Empty weightAmong 54 .45-70 Government rifles4.99 kg4.08 kgHeavier than about 90%
Overall lengthAmong 52 .45-70 Government rifles1220 mm1198 mmLonger than about 60%
Barrel lengthAmong 58 .45-70 Government rifles762 mm711 mmLonger than about 70%
Magazine capacityAmong 57 .45-70 Government rifles11Holds fewer rounds than about 70%

Answers

Questions about the Ballard No. 5 Pacific

Copy a link to this section
How much does the Ballard No. 5 Pacific weigh?

The Ballard No. 5 Pacific weighs 4.99 kg (11.00 lb) empty.

What caliber is the Ballard No. 5 Pacific?

The Ballard No. 5 Pacific is chambered in .45-70 Government.

How many rounds does the Ballard No. 5 Pacific hold?

The Ballard No. 5 Pacific holds 1 rounds, fed from an internal magazine.

How long is the Ballard No. 5 Pacific?

The Ballard No. 5 Pacific is 1220 mm (48.0 in) long overall, with a 762 mm (30.0 in) barrel.

Who makes the Ballard No. 5 Pacific?

The Ballard No. 5 Pacific is made by Marlin Firearms (United States). It was designed by Charles Henry Ballard.

When was the Ballard No. 5 Pacific introduced?

The Ballard No. 5 Pacific was introduced in 1876 and discontinued in 1891.

How does the Ballard No. 5 Pacific operate?

The Ballard No. 5 Pacific uses a falling block action, and its firing mechanism is hammer fired.

Compatibility

Which parts fit this firearm

Copy a link to this section

Studio

Every part that mounts on this, resolved

Not a list the maker typed out: the answer comes from the mounts this firearm exposes and the interface each part needs, so it stays right when either one changes.

  • Every part that mounts on any firearm in the catalogue
  • Interface standards, platforms and fit overrides
  • The same answers through the API and the MCP server

Requires a signed-in GunSpec account on the Studio plan. The answer is computed per part, so it is not part of the public record.

Provenance

What the record holds

Every figure above was taken from one of these pages. The confidence reflects how much of the record came from a page a claim can be checked against.

Copy a link to this section

In service

American buffalo hunters and long-range marksmen
United States

Provenance

Confidence in this record

66%

Stockists

Where to buy

Offers link straight to the shop. GunSpec never takes the order.

Copy a link to this section

No shop has listed this firearm yet

Stock and prices come from the shops themselves. If you sell this firearm, you can list it and it appears here.

List a firearm

MCP

Ask an assistant about it

The same record, reached the way a person asks for it rather than the way a program does.

Copy a link to this section

Ask GunSpec

Works with

Claude CodeClaude DesktopCursorVS CodeGitHub CopilotWindsurf

Point an MCP client at GunSpec and it answers from the catalogue rather than from memory. A free key covers the read tools.

API

The call that returns this record

The same fields, in the same units, from the same endpoint the page reads.

Copy a link to this section
curl --request GET \  --url 'https://api.gunspec.io/v1/firearms/ballard-no-5-pacific' \  --header 'X-API-Key: your_key'
Response
{  "id": "ballard-no-5-pacific",  "name": "Ballard No. 5 Pacific",  "manufacturer": {    "id": "marlin",    "name": "Marlin Firearms",    "countryCode": "US",    "foundedYear": 1870,    "website": "https://www.marlinfirearms.com",    "logoUrl": null,    "description": null,    "status": null,    "defunctYear": null,    "stateOwned": null,    "makesFirearms": null,    "parentId": null,    "predecessorId": null,    "createdAt": "2026-02-11 23:44:38",    "updatedAt": "2026-02-18 03:40:45",    "version": "08b9da27118c263f9c36f65336e51854a1570768f3f677491f8144ee945b8d1f"  },  "category": {    "id": "rifle",    "name": "Rifle",    "description": "Long-barreled firearms designed for accurate shooting"  },  "country_of_origin": "US",  "year_introduced": 1876,  "barrel_length_mm": 762,  "weight_empty_g": 4990,  "action_type": "falling_block"}