Notice

New Media API EndpointPull newly uploaded firearm images and rendersAll Media API Endpoint

Desert Tech Sabertooth

Category
Assault Rifle
Barrel
508 mm
Weight, empty
3.72 kg
Introduced
2024

About

What it is, and why it matters

Copy a link to this section

The Desert Tech Sabertooth is a select-fire, multi-caliber bullpup assault rifle developed for the military and law enforcement market. Announced in January 2024, it is the fully-automatic-capable sibling of the semi-automatic WLVRN, built on the same short-stroke gas-piston, rotating-bolt, forward-ejecting bullpup platform. The Sabertooth supports rapid caliber conversion between 5.56x45mm NATO/.223 Wylde, .308 Winchester, 6.5mm Creedmoor, and .300 AAC Blackout, and by regulatory design its select-fire fire-control group is not interchangeable with the civilian WLVRN.

Desert Tech unveiled the Sabertooth on January 19, 2024 as the select-fire counterpart to its WLVRN bullpup - a rare American attempt at a truly caliber-swappable service rifle that can transform from a 5.56mm carbine into a 6.5 Creedmoor precision weapon in minutes.

The Sabertooth's select-fire capability and fire-control components are deliberately non-interchangeable with the civilian semi-automatic WLVRN to satisfy regulatory requirements. Offered in 11.5, 16, and 20-inch barrel lengths; the cyclic rate is 675 rpm across all chamberings. Specifications shown reflect the 20-inch .223 REM/5.56 configuration (rifle length 30 in, ~8.2 lb).

Specification

Everything measured

Copy a link to this section

IdentityWhat it is, who built it and when.

Manufacturer
Desert Tech
Category
Assault Rifle
Country
United States
Status
In production
Produced
2024

DimensionsAs issued, without a magazine or an optic.

Barrel
508 mm
Overall length
762 mm
Height
200 mm
Width
43 mm
Weight, empty
3.72 kg

ActionHow it cycles, what trips it, and what feeds it.

Action
Gas operated short stroke
Firing mechanism
Hammer fired
Trigger
Single stage
Trigger pull
18.0 N
Capacity
30
Magazine
Detachable box

MaterialsEach swatch is the material itself, not a colour chosen to stand for it.

Frame
Polymer
Barrel
Steel
Stock
Polymer
Finish
Cerakote

BallisticsFrom the service cartridge, not a handload.

Muzzle velocity
940 m/s
Muzzle energy
1767 J
Effective range
500 m
Maximum range
3600 m
Rate of fire
675 rpm

Trajectory

What the round does downrange

Solved from the muzzle figures and the bullet. The dashed rule is the effective range on the record, and the crosses are the steps the solver returned.

Copy a link to this section

0 m991 m/s

02505007501k577 m0501002003004005006008001000

Features

What it has

What the record lists as fitted, drawn from the catalogue.

Copy a link to this section
  • Bullpup configuration
  • Select fire
  • Multi caliber conversion
  • Short stroke gas piston
  • Adjustable gas block
  • Forward ejection
  • Ambidextrous controls
  • Full length accessory rail

Standing

How it compares

Copy a link to this section

Each figure against the firearms of the same type and cartridge that record it, or of the same type where that cartridge has too few. Positions are read to the nearest tenth.

MeasurementThis firearmMedianPosition
Empty weightAmong 158 5.56x45mm NATO assault rifles3.72 kg3.60 kgHeavier than about 70%
Overall lengthAmong 156 5.56x45mm NATO assault rifles762 mm920 mmShorter than about 80%
Barrel lengthAmong 157 5.56x45mm NATO assault rifles508 mm449 mmLonger than about 90%
Magazine capacityAmong 158 5.56x45mm NATO assault rifles3030Near the median

Answers

Questions about the Desert Tech Sabertooth

Copy a link to this section
How much does the Desert Tech Sabertooth weigh?

The Desert Tech Sabertooth weighs 3.72 kg (8.20 lb) empty.

What caliber is the Desert Tech Sabertooth?

The Desert Tech Sabertooth is chambered in 5.56x45mm NATO, .300 AAC Blackout, .308 Winchester, and 6.5 Creedmoor.

How many rounds does the Desert Tech Sabertooth hold?

The Desert Tech Sabertooth holds 30 rounds, fed from a detachable box magazine.

How long is the Desert Tech Sabertooth?

The Desert Tech Sabertooth is 762 mm (30.0 in) long overall, with a 508 mm (20.0 in) barrel.

Who makes the Desert Tech Sabertooth?

The Desert Tech Sabertooth is made by Desert Tech (United States).

When was the Desert Tech Sabertooth introduced?

The Desert Tech Sabertooth was introduced in 2024.

How does the Desert Tech Sabertooth operate?

The Desert Tech Sabertooth uses a gas operated short stroke action, and its firing mechanism is hammer fired.

Compatibility

Which parts fit this firearm

Copy a link to this section

Studio

Every part that mounts on this, resolved

Not a list the maker typed out: the answer comes from the mounts this firearm exposes and the interface each part needs, so it stays right when either one changes.

  • Every part that mounts on any firearm in the catalogue
  • Interface standards, platforms and fit overrides
  • The same answers through the API and the MCP server

Requires a signed-in GunSpec account on the Studio plan. The answer is computed per part, so it is not part of the public record.

Provenance

What the record holds

Every figure above was taken from one of these pages. The confidence reflects how much of the record came from a page a claim can be checked against.

Copy a link to this section

Provenance

Stockists

Where to buy

Offers link straight to the shop. GunSpec never takes the order.

Copy a link to this section

No shop has listed this firearm yet

Stock and prices come from the shops themselves. If you sell this firearm, you can list it and it appears here.

List a firearm

MCP

Ask an assistant about it

The same record, reached the way a person asks for it rather than the way a program does.

Copy a link to this section

Ask GunSpec

Works with

Claude CodeClaude DesktopCursorVS CodeGitHub CopilotWindsurf

Point an MCP client at GunSpec and it answers from the catalogue rather than from memory. A free key covers the read tools.

API

The call that returns this record

The same fields, in the same units, from the same endpoint the page reads.

Copy a link to this section
curl --request GET \  --url 'https://api.gunspec.io/v1/firearms/desert-tech-sabertooth' \  --header 'X-API-Key: your_key'
Response
{  "id": "desert-tech-sabertooth",  "name": "Desert Tech Sabertooth",  "manufacturer": {    "id": "desert-tech",    "name": "Desert Tech",    "countryCode": "US",    "foundedYear": 2007,    "website": "https://www.deserttech.com",    "logoUrl": null,    "description": null,    "status": null,    "defunctYear": null,    "stateOwned": null,    "makesFirearms": null,    "parentId": null,    "predecessorId": null,    "createdAt": "2026-04-05 22:24:37",    "updatedAt": "2026-04-05 22:24:37",    "version": "dc44519af9814e839b3ba8ee4edc5de5ae211ae9c34cc65c9af57c91e0a8e3bd"  },  "category": {    "id": "assault-rifle",    "name": "Assault Rifle",    "description": "Selective-fire rifles chambered in intermediate cartridges"  },  "country_of_origin": "US",  "year_introduced": 2024,  "barrel_length_mm": 508,  "weight_empty_g": 3719,  "action_type": "gas_operated_short_stroke"}