Notice

New Media API EndpointPull newly uploaded firearm images and rendersAll Media API Endpoint

Diamondback Firearms SDR

Diamondback Firearms SDR
Category
Revolver
Barrel
51 mm
Weight, empty
601 g
Introduced
2024

About

What it is, and why it matters

Copy a link to this section

The Diamondback SDR (Self Defense Revolver) is a 6-shot, .357 Magnum snub-nose revolver introduced in 2024, also rated for .38 Special +P (with a 9mm +P chambering offered). It is built on a forged stainless-steel frame with a matching stainless barrel and cylinder, a smooth non-stacking trigger, a fully captured cylinder/crane assembly, a push-button cylinder release and low-profile fiber-optic sights front and rear. A 45-degree target-crown muzzle and concealed hardware round out a modern take on the carry six-shooter; 2 in and 3 in barrels are offered.

Founded in 2009 in Cocoa, Florida, Diamondback Firearms grew from a subcompact-pistol maker into a full-line manufacturer of AR-pattern rifles, pistols and rimfire revolvers, all produced domestically in the USA.

MSRP approx. $614-$832 depending on finish. SKU DB0700 series. Offered in polished stainless, glass bead and black nitride finishes, in 2 in and 3 in barrels. DA pull approx. 9.9 lb, SA approx. 2.3 lb.

Specification

Everything measured

Copy a link to this section

IdentityWhat it is, who built it and when.

Manufacturer
Diamondback Firearms
Category
Revolver
Country
United States
Status
In production
Produced
2024

DimensionsAs issued, without a magazine or an optic.

Barrel
51 mm
Overall length
166 mm
Height
113 mm
Weight, empty
601 g

ActionHow it cycles, what trips it, and what feeds it.

Action
Double action
Firing mechanism
Hammer fired
Trigger
Double action single action
Trigger pull
44.0 N
Capacity
6
Magazine
Revolving cylinder

MaterialsEach swatch is the material itself, not a colour chosen to stand for it.

Frame
Stainless steel
Barrel
Stainless steel
Stock
Polymer
Finish
Stainless

BallisticsFrom the service cartridge, not a handload.

Effective range
25 m

Trajectory

What the round does downrange

Solved from the muzzle figures and the bullet. The dashed rule is the effective range on the record, and the crosses are the steps the solver returned.

Copy a link to this section

0 m331 m/s

0100200300400180 m0501002003004005006008001000

Features

What it has

What the record lists as fitted, drawn from the catalogue.

Copy a link to this section
  • Fiber optic sights
  • Push button cylinder release
  • Concealed hammer
  • Target crown

Standing

How it compares

Copy a link to this section

Each figure against the firearms of the same type and cartridge that record it, or of the same type where that cartridge has too few. Positions are read to the nearest tenth.

MeasurementThis firearmMedianPosition
Empty weightAmong 53 .357 Magnum revolvers601 g1.10 kgLighter than about 90%
Overall lengthAmong 50 .357 Magnum revolvers166 mm245 mmAmong the shortest tenth
Barrel lengthAmong 53 .357 Magnum revolvers51 mm107 mmAmong the shortest tenth
Magazine capacityAmong 53 .357 Magnum revolvers66Near the median

Answers

Questions about the Diamondback Firearms SDR

Copy a link to this section
How much does the Diamondback Firearms SDR weigh?

The Diamondback Firearms SDR weighs 601 g (1.32 lb) empty. It is the 2nd lightest of 53 .357 Magnum revolvers in the catalogue.

What caliber is the Diamondback Firearms SDR?

The Diamondback Firearms SDR is chambered in .357 Magnum and .38 Special.

How many rounds does the Diamondback Firearms SDR hold?

The Diamondback Firearms SDR holds 6 rounds, fed from a revolving cylinder.

How long is the Diamondback Firearms SDR?

The Diamondback Firearms SDR is 166 mm (6.54 in) long overall, with a 51 mm (2.01 in) barrel.

Who makes the Diamondback Firearms SDR?

The Diamondback Firearms SDR is made by Diamondback Firearms (United States).

When was the Diamondback Firearms SDR introduced?

The Diamondback Firearms SDR was introduced in 2024.

How does the Diamondback Firearms SDR operate?

The Diamondback Firearms SDR uses a double action, and its firing mechanism is hammer fired.

Compatibility

Which parts fit this firearm

Copy a link to this section

Studio

Every part that mounts on this, resolved

Not a list the maker typed out: the answer comes from the mounts this firearm exposes and the interface each part needs, so it stays right when either one changes.

  • Every part that mounts on any firearm in the catalogue
  • Interface standards, platforms and fit overrides
  • The same answers through the API and the MCP server

Requires a signed-in GunSpec account on the Studio plan. The answer is computed per part, so it is not part of the public record.

Provenance

What the record holds

Every figure above was taken from one of these pages. The confidence reflects how much of the record came from a page a claim can be checked against.

Copy a link to this section

Provenance

Confidence in this record

78%

Stockists

Where to buy

Offers link straight to the shop. GunSpec never takes the order.

Copy a link to this section

No shop has listed this firearm yet

Stock and prices come from the shops themselves. If you sell this firearm, you can list it and it appears here.

List a firearm

MCP

Ask an assistant about it

The same record, reached the way a person asks for it rather than the way a program does.

Copy a link to this section

Ask GunSpec

Works with

Claude CodeClaude DesktopCursorVS CodeGitHub CopilotWindsurf

Point an MCP client at GunSpec and it answers from the catalogue rather than from memory. A free key covers the read tools.

API

The call that returns this record

The same fields, in the same units, from the same endpoint the page reads.

Copy a link to this section
curl --request GET \  --url 'https://api.gunspec.io/v1/firearms/diamondback-sdr' \  --header 'X-API-Key: your_key'
Response
{  "id": "diamondback-sdr",  "name": "Diamondback Firearms SDR",  "manufacturer": {    "id": "diamondback",    "name": "Diamondback Firearms",    "countryCode": "US",    "foundedYear": 2009,    "website": "https://www.diamondbackfirearms.com",    "logoUrl": null,    "description": null,    "status": null,    "defunctYear": null,    "stateOwned": null,    "makesFirearms": null,    "parentId": null,    "predecessorId": null,    "createdAt": "2026-02-18 03:40:42",    "updatedAt": "2026-02-18 03:43:46",    "version": "245a4d5f5ffc5204ba388fe1b03065815b2895500ff4836d15d9cb1c2935e92f"  },  "category": {    "id": "revolver",    "name": "Revolver",    "description": "Handguns with a revolving cylinder containing multiple chambers"  },  "country_of_origin": "US",  "year_introduced": 2024,  "barrel_length_mm": 51,  "weight_empty_g": 601,  "action_type": "double_action"}