Notice

New Media API EndpointPull newly uploaded firearm images and rendersAll Media API Endpoint

Kimber K6s DCR

Category
Revolver
Barrel
51 mm
Weight, empty
652 g
Introduced
2018

About

What it is, and why it matters

Copy a link to this section

The Kimber K6s DCR (Deluxe Carry Revolver) is a compact double-action-only revolver chambered in .357 Magnum, manufactured by Kimber Manufacturing. A dressed-up member of Kimber's K6s family, it pairs a snub-nosed 2-inch barrel with a six-round cylinder, one more round than most competing small-frame revolvers of similar size. The double-action-only mechanism runs through a smooth match-grade trigger and hides its hammer within the frame, eliminating snag points for concealed carry while the transfer-bar safety keeps the revolver drop-safe. The all stainless steel frame carries a satin silver finish and deeply checkered laminated rosewood grips, while a bright fiber-optic front sight paired with a serrated, drift-adjustable rear sight speeds target acquisition. Rated for full-power .357 Magnum loads yet compact enough for pocket or belt carry, the K6s DCR is intended as a premium everyday-carry and backup revolver for civilian defensive use.

Kimber built its name on refined 1911 pistols before entering the revolver market with the K6s in 2016; the DCR trim arrived in 2018 as a deluxe carry configuration, wrapping a six-shot .357 snub in satin stainless and figured wood for shooters who wanted a premium pocket wheelgun.

Deluxe Carry Revolver trim level of the K6s line: satin silver finish, checkered laminated rosewood grips, and fiber-optic front sight. DAO with fully shrouded hammer. Ships with a single speed-strip. Factory trigger pull approximately 9.5-10.5 lb.

Specification

Everything measured

Copy a link to this section

IdentityWhat it is, who built it and when.

Manufacturer
Kimber Manufacturing
Category
Revolver
Country
United States
Status
In production
Produced
2018
Variant of
Deluxe carry

DimensionsAs issued, without a magazine or an optic.

Barrel
51 mm
Overall length
168 mm
Height
113 mm
Width
35 mm
Sight radius
104 mm
Weight, empty
652 g

ActionHow it cycles, what trips it, and what feeds it.

Action
Double action revolver
Firing mechanism
Double action only
Trigger
Double action
Trigger pull
44.0 N
Capacity
6
Magazine
Revolving cylinder

MaterialsEach swatch is the material itself, not a colour chosen to stand for it.

Frame
Stainless steel
Barrel
Stainless steel
Stock
Laminated wood
Finish
Satin silver

BallisticsFrom the service cartridge, not a handload.

Effective range
25 m

Trajectory

What the round does downrange

Solved from the muzzle figures and the bullet. The dashed rule is the effective range on the record, and the crosses are the steps the solver returned.

Copy a link to this section

0 m331 m/s

0100200300400180 m0501002003004005006008001000

Features

What it has

What the record lists as fitted, drawn from the catalogue.

Copy a link to this section
  • Swing out cylinder
  • Shrouded hammer
  • Fiber optic front sight
  • Drift adjustable rear sight
  • Full length barrel lug
  • Checkered rosewood grips
  • Stainless steel construction

Standing

How it compares

Copy a link to this section

Each figure against the firearms of the same type and cartridge that record it, or of the same type where that cartridge has too few. Positions are read to the nearest tenth.

MeasurementThis firearmMedianPosition
Empty weightAmong 53 .357 Magnum revolvers652 g1.10 kgLighter than about 90%
Overall lengthAmong 50 .357 Magnum revolvers168 mm245 mmAmong the shortest tenth
Barrel lengthAmong 53 .357 Magnum revolvers51 mm107 mmAmong the shortest tenth
Magazine capacityAmong 53 .357 Magnum revolvers66Near the median

Answers

Questions about the Kimber K6s DCR

Copy a link to this section
How much does the Kimber K6s DCR weigh?

The Kimber K6s DCR weighs 652 g (1.44 lb) empty. It is the 3rd lightest of 53 .357 Magnum revolvers in the catalogue.

What caliber is the Kimber K6s DCR?

The Kimber K6s DCR is chambered in .357 Magnum.

How many rounds does the Kimber K6s DCR hold?

The Kimber K6s DCR holds 6 rounds, fed from a revolving cylinder.

How long is the Kimber K6s DCR?

The Kimber K6s DCR is 168 mm (6.61 in) long overall, with a 51 mm (2.01 in) barrel.

Who makes the Kimber K6s DCR?

The Kimber K6s DCR is made by Kimber Manufacturing (United States).

When was the Kimber K6s DCR introduced?

The Kimber K6s DCR was introduced in 2018.

How does the Kimber K6s DCR operate?

The Kimber K6s DCR uses a double action, and its firing mechanism is double action only.

Compatibility

Which parts fit this firearm

Copy a link to this section

Studio

Every part that mounts on this, resolved

Not a list the maker typed out: the answer comes from the mounts this firearm exposes and the interface each part needs, so it stays right when either one changes.

  • Every part that mounts on any firearm in the catalogue
  • Interface standards, platforms and fit overrides
  • The same answers through the API and the MCP server

Requires a signed-in GunSpec account on the Studio plan. The answer is computed per part, so it is not part of the public record.

Provenance

What the record holds

Every figure above was taken from one of these pages. The confidence reflects how much of the record came from a page a claim can be checked against.

Copy a link to this section

Provenance

Confidence in this record

82%

Stockists

Where to buy

Offers link straight to the shop. GunSpec never takes the order.

Copy a link to this section

No shop has listed this firearm yet

Stock and prices come from the shops themselves. If you sell this firearm, you can list it and it appears here.

List a firearm

MCP

Ask an assistant about it

The same record, reached the way a person asks for it rather than the way a program does.

Copy a link to this section

Ask GunSpec

Works with

Claude CodeClaude DesktopCursorVS CodeGitHub CopilotWindsurf

Point an MCP client at GunSpec and it answers from the catalogue rather than from memory. A free key covers the read tools.

API

The call that returns this record

The same fields, in the same units, from the same endpoint the page reads.

Copy a link to this section
curl --request GET \  --url 'https://api.gunspec.io/v1/firearms/kimber-k6s-dcr' \  --header 'X-API-Key: your_key'
Response
{  "id": "kimber-k6s-dcr",  "name": "Kimber K6s DCR",  "manufacturer": {    "id": "kimber",    "name": "Kimber Manufacturing",    "countryCode": "US",    "foundedYear": 1979,    "website": "https://www.kimberamerica.com",    "logoUrl": null,    "description": null,    "status": null,    "defunctYear": null,    "stateOwned": null,    "makesFirearms": null,    "parentId": null,    "predecessorId": null,    "createdAt": "2026-02-11 23:44:38",    "updatedAt": "2026-02-18 03:40:45",    "version": "d5d5cdbc795f1bba93140550f63b96720d2b00163c3b843db0144f1aeed186f3"  },  "category": {    "id": "revolver",    "name": "Revolver",    "description": "Handguns with a revolving cylinder containing multiple chambers"  },  "country_of_origin": "US",  "year_introduced": 2018,  "barrel_length_mm": 51,  "weight_empty_g": 652,  "action_type": "double_action_revolver"}