Notice

New Media API EndpointPull newly uploaded firearm images and rendersAll Media API Endpoint

Pattern 1914 Enfield Sniper

Pattern 1914 Enfield Sniper
Category
Sniper Rifle
Barrel
660 mm
Weight, empty
4.25 kg
Introduced
1914

About

What it is, and why it matters

Copy a link to this section

The Pattern 1914 Enfield Sniper (designated P14 (T) for 'Telescopic') was the principal British sniper rifle of World War I and continued in the role into World War II. Based on a modified Mauser action designed at the Royal Small Arms Factory, Enfield, the P14 was found to be inherently more accurate than the Short Magazine Lee-Enfield and was therefore selected as the primary sniping platform. Manufactured under contract in the United States by Winchester, Remington, and Eddystone, the P14 sniper featured fine-adjustment aperture rear sights and could be fitted with various telescopic sights including the Aldis, Periscopic Prism Company, and Winchester A5 scopes.

The P14 sniper became the weapon of choice for British sniping sections on the Western Front, where the trench warfare environment made accurate long-range fire critically important. Major Hesketh Prichard, who established the British Army's first formal sniping school at Linghem in 1916, championed the P14 for its superior accuracy over the SMLE and trained hundreds of snipers in its use. The rifle's Mauser-derived action gave it an edge in precision that the faster-firing but less inherently accurate Lee-Enfield could not match.

The P14 was designed before WWI as a potential replacement for the SMLE, featuring a modified Mauser-type action with controlled-round feed and a stronger locking system. However, it was never adopted as the standard service rifle due to the complexity and cost of retooling. Instead, it found its niche as a sniper and reserve weapon. The 'T' suffix in P14 (T) designated the telescopic sight variant. Over 1.2 million P14 rifles were produced in total, with the most accurate examples selected for sniper conversion. The rifle was officially declared obsolete in 1947 but had already been supplanted by the Lee-Enfield No.4 Mk I (T) sniper in most roles by the end of WWII.

Specification

Everything measured

Copy a link to this section

IdentityWhat it is, who built it and when.

Manufacturer
Winchester Repeating Arms Company
Category
Sniper Rifle
Country
United Kingdom
Status
Out of production
Produced
1914 to 1947
Variant of
Sniper

DimensionsAs issued, without a magazine or an optic.

Barrel
660 mm
Overall length
1175 mm
Weight, empty
4.25 kg
Weight, loaded
4.50 kg

ActionHow it cycles, what trips it, and what feeds it.

Action
Bolt action
Firing mechanism
Striker fired
Trigger
Two stage
Capacity
5
Magazine
Internal

MaterialsEach swatch is the material itself, not a colour chosen to stand for it.

Frame
Steel
Barrel
Steel
Stock
Wood
Finish
Blued

BallisticsFrom the service cartridge, not a handload.

Muzzle velocity
744 m/s
Muzzle energy
3126 J
Effective range
800 m
Maximum range
2500 m

Trajectory

What the round does downrange

Solved from the muzzle figures and the bullet. The dashed rule is the effective range on the record, and the crosses are the steps the solver returned.

Copy a link to this section

No load solved for this record yetThe flight path is computed from a cartridge and a bullet. This record has no ammunition filed against its chambering, so there is nothing to solve.

Features

What it has

What the record lists as fitted, drawn from the catalogue.

Copy a link to this section
  • Mauser type action
  • Fine adjustment aperture rearsight
  • Telescopic sight mount
  • Protected front sight
  • Long range volley sights

Standing

How it compares

Copy a link to this section

Each figure against the firearms of the same type and cartridge that record it, or of the same type where that cartridge has too few. Positions are read to the nearest tenth.

MeasurementThis firearmMedianPosition
Empty weightAmong 430 sniper rifles4.25 kg5.40 kgLighter than about 80%
Overall lengthAmong 429 sniper rifles1175 mm1150 mmLonger than about 60%
Barrel lengthAmong 434 sniper rifles660 mm620 mmLonger than about 60%
Magazine capacityAmong 434 sniper rifles56Holds fewer rounds than about 70%

Answers

Questions about the Pattern 1914 Enfield Sniper

Copy a link to this section
How much does the Pattern 1914 Enfield Sniper weigh?

The Pattern 1914 Enfield Sniper weighs 4.25 kg (9.37 lb) empty and 4.50 kg (9.92 lb) loaded.

What caliber is the Pattern 1914 Enfield Sniper?

The Pattern 1914 Enfield Sniper is chambered in .303 British.

How many rounds does the Pattern 1914 Enfield Sniper hold?

The Pattern 1914 Enfield Sniper holds 5 rounds, fed from an internal magazine.

How long is the Pattern 1914 Enfield Sniper?

The Pattern 1914 Enfield Sniper is 1175 mm (46.3 in) long overall, with a 660 mm (26.0 in) barrel.

Who makes the Pattern 1914 Enfield Sniper?

The Pattern 1914 Enfield Sniper is made by Winchester Repeating Arms Company (United States). It was designed by Royal Small Arms Factory, Enfield.

When was the Pattern 1914 Enfield Sniper introduced?

The Pattern 1914 Enfield Sniper was introduced in 1914 and discontinued in 1947.

How does the Pattern 1914 Enfield Sniper operate?

The Pattern 1914 Enfield Sniper uses a bolt action, and its firing mechanism is striker fired.

Compatibility

Which parts fit this firearm

Copy a link to this section

Studio

Every part that mounts on this, resolved

Not a list the maker typed out: the answer comes from the mounts this firearm exposes and the interface each part needs, so it stays right when either one changes.

  • Every part that mounts on any firearm in the catalogue
  • Interface standards, platforms and fit overrides
  • The same answers through the API and the MCP server

Requires a signed-in GunSpec account on the Studio plan. The answer is computed per part, so it is not part of the public record.

Provenance

What the record holds

Every figure above was taken from one of these pages. The confidence reflects how much of the record came from a page a claim can be checked against.

Copy a link to this section

In service

British Army
1914
Australian Army
Australia
Canadian Expeditionary Force
Canada

Provenance

Stockists

Where to buy

Offers link straight to the shop. GunSpec never takes the order.

Copy a link to this section

No shop has listed this firearm yet

Stock and prices come from the shops themselves. If you sell this firearm, you can list it and it appears here.

List a firearm

MCP

Ask an assistant about it

The same record, reached the way a person asks for it rather than the way a program does.

Copy a link to this section

Ask GunSpec

Works with

Claude CodeClaude DesktopCursorVS CodeGitHub CopilotWindsurf

Point an MCP client at GunSpec and it answers from the catalogue rather than from memory. A free key covers the read tools.

API

The call that returns this record

The same fields, in the same units, from the same endpoint the page reads.

Copy a link to this section
curl --request GET \  --url 'https://api.gunspec.io/v1/firearms/pattern-1914-enfield-sniper' \  --header 'X-API-Key: your_key'
Response
{  "id": "pattern-1914-enfield-sniper",  "name": "Pattern 1914 Enfield Sniper",  "manufacturer": {    "id": "winchester",    "name": "Winchester Repeating Arms Company",    "countryCode": "US",    "foundedYear": 1866,    "website": "https://www.winchesterguns.com",    "logoUrl": null,    "description": null,    "status": null,    "defunctYear": null,    "stateOwned": null,    "makesFirearms": null,    "parentId": null,    "predecessorId": null,    "createdAt": "2026-02-11 23:44:38",    "updatedAt": "2026-02-18 03:40:45",    "version": "032f75658544de9d931ca09f772b9ab92b282bf53db67851bf4eb3f8c0612520"  },  "category": {    "id": "sniper-rifle",    "name": "Sniper Rifle",    "description": "Precision rifles optimized for long-range accuracy"  },  "country_of_origin": "GB",  "year_introduced": 1914,  "barrel_length_mm": 660,  "weight_empty_g": 4250,  "action_type": "bolt_action"}