Notice

New Media API EndpointPull newly uploaded firearm images and rendersAll Media API Endpoint

Smith & Wesson M&P10

Smith & Wesson M&P10
Category
Battle Rifle
Barrel
457 mm
Weight, empty
3.50 kg
Introduced
2013

About

What it is, and why it matters

Copy a link to this section

The Smith & Wesson M&P10 is an AR-10-pattern semi-automatic rifle chambered in .308 Winchester/7.62x51mm NATO, introduced in 2013 as the large-frame counterpart to the popular 5.56mm M&P15. It uses a direct gas impingement system, a 7075-T6 aluminum upper and lower receiver, an 18-inch 4140 steel barrel and a six-position collapsible stock, feeding from SR-25/DPMS-pattern detachable box magazines. Marketed for hunting, sport shooting and home defense, it brought Smith & Wesson's modern sporting rifle line into the full-power .308 segment.

Smith & Wesson scaled its best-selling M&P15 up to the full-power .308 cartridge, giving the M&P series a deer-and-hog-capable big brother that still ran on familiar AR controls.

Early M&P10 rifles used a redesigned firing-pin spring intended to eliminate the potential for an unintentional discharge. Later Sport and Performance Center variants added optics-ready configurations and a 6.5mm Creedmoor chambering on the longer-barreled PC model.

Specification

Everything measured

Copy a link to this section

IdentityWhat it is, who built it and when.

Manufacturer
Smith & Wesson
Category
Battle Rifle
Country
United States
Status
In production
Produced
2013

DimensionsAs issued, without a magazine or an optic.

Barrel
457 mm
Overall length
955 mm
Weight, empty
3.50 kg

ActionHow it cycles, what trips it, and what feeds it.

Action
Gas operated direct impingement
Firing mechanism
Hammer fired
Trigger
Single stage
Trigger pull
27.0 N
Capacity
20
Magazine
Detachable box

MaterialsEach swatch is the material itself, not a colour chosen to stand for it.

Frame
Aluminum
Barrel
Steel
Stock
Polymer
Finish
Hard coat anodized

BallisticsFrom the service cartridge, not a handload.

Muzzle velocity
800 m/s
Muzzle energy
3344 J
Effective range
600 m
Maximum range
1000 m

Trajectory

What the round does downrange

Solved from the muzzle figures and the bullet. The dashed rule is the effective range on the record, and the crosses are the steps the solver returned.

Copy a link to this section

0 m800 m/s

0200400600800479 m0501002003004005006008001000

Features

What it has

What the record lists as fitted, drawn from the catalogue.

Copy a link to this section
  • Ar 10 pattern
  • Direct gas impingement
  • Sr25 pattern magazine
  • Six position collapsible stock
  • Flat top picatinny rail
  • Smith wesson enhanced flash hider
  • Armornite coated barrel

Standing

How it compares

Copy a link to this section

Each figure against the firearms of the same type and cartridge that record it, or of the same type where that cartridge has too few. Positions are read to the nearest tenth.

MeasurementThis firearmMedianPosition
Empty weightAmong 86 7.62x51mm NATO battle rifles3.50 kg4.30 kgLighter than about 90%
Overall lengthAmong 85 7.62x51mm NATO battle rifles955 mm1025 mmShorter than about 90%
Barrel lengthAmong 87 7.62x51mm NATO battle rifles457 mm458 mmShorter than about 60%
Magazine capacityAmong 87 7.62x51mm NATO battle rifles2020Near the median

Answers

Questions about the Smith & Wesson M&P10

Copy a link to this section
How much does the Smith & Wesson M&P10 weigh?

The Smith & Wesson M&P10 weighs 3.50 kg (7.72 lb) empty. It is the 5th lightest of 86 7.62x51mm NATO battle rifles in the catalogue.

What caliber is the Smith & Wesson M&P10?

The Smith & Wesson M&P10 is chambered in 7.62x51mm NATO.

How many rounds does the Smith & Wesson M&P10 hold?

The Smith & Wesson M&P10 holds 20 rounds, fed from a detachable box magazine.

How long is the Smith & Wesson M&P10?

The Smith & Wesson M&P10 is 955 mm (37.6 in) long overall, with a 457 mm (18.0 in) barrel.

Who makes the Smith & Wesson M&P10?

The Smith & Wesson M&P10 is made by Smith & Wesson (United States).

When was the Smith & Wesson M&P10 introduced?

The Smith & Wesson M&P10 was introduced in 2013.

How does the Smith & Wesson M&P10 operate?

The Smith & Wesson M&P10 uses a gas operated direct impingement action, and its firing mechanism is hammer fired.

Compatibility

Which parts fit this firearm

Copy a link to this section

Studio

Every part that mounts on this, resolved

Not a list the maker typed out: the answer comes from the mounts this firearm exposes and the interface each part needs, so it stays right when either one changes.

  • Every part that mounts on any firearm in the catalogue
  • Interface standards, platforms and fit overrides
  • The same answers through the API and the MCP server

Requires a signed-in GunSpec account on the Studio plan. The answer is computed per part, so it is not part of the public record.

Provenance

What the record holds

Every figure above was taken from one of these pages. The confidence reflects how much of the record came from a page a claim can be checked against.

Copy a link to this section

In service

Civilian sport and hunting market
United States

Provenance

Confidence in this record

78%

Stockists

Where to buy

Offers link straight to the shop. GunSpec never takes the order.

Copy a link to this section

No shop has listed this firearm yet

Stock and prices come from the shops themselves. If you sell this firearm, you can list it and it appears here.

List a firearm

MCP

Ask an assistant about it

The same record, reached the way a person asks for it rather than the way a program does.

Copy a link to this section

Ask GunSpec

Works with

Claude CodeClaude DesktopCursorVS CodeGitHub CopilotWindsurf

Point an MCP client at GunSpec and it answers from the catalogue rather than from memory. A free key covers the read tools.

API

The call that returns this record

The same fields, in the same units, from the same endpoint the page reads.

Copy a link to this section
curl --request GET \  --url 'https://api.gunspec.io/v1/firearms/smith-wesson-mp10' \  --header 'X-API-Key: your_key'
Response
{  "id": "smith-wesson-mp10",  "name": "Smith & Wesson M&P10",  "manufacturer": {    "id": "smith-wesson",    "name": "Smith & Wesson",    "countryCode": "US",    "foundedYear": 1852,    "website": "https://www.smith-wesson.com",    "logoUrl": null,    "description": null,    "status": null,    "defunctYear": null,    "stateOwned": null,    "makesFirearms": null,    "parentId": null,    "predecessorId": null,    "createdAt": "2026-02-11 23:44:40",    "updatedAt": "2026-02-18 03:40:48",    "version": "6e259a578cb1b21d72610d761d652c983ff25806b9e736e2db8d2938596e9202"  },  "category": {    "id": "battle-rifle",    "name": "Battle Rifle",    "description": "Selective-fire rifles chambered in full-power cartridges"  },  "country_of_origin": "US",  "year_introduced": 2013,  "barrel_length_mm": 457,  "weight_empty_g": 3500,  "action_type": "gas_operated_direct_impingement"}