Uberti Cattleman SASS Pro
- Category
- Revolver
- Barrel
- 121 mm
- Weight, empty
- 1.04 kg
- Introduced
- Not recorded
About
What it is, and why it matters
The Uberti Cattleman SASS Pro is a single-action revolver chambered in .357 Magnum, built by A. Uberti of Italy as a competition-tuned reproduction of the classic 1873 Single Action Army. Purpose-built for Single Action Shooting Society (SASS) cowboy action matches, it features a short-stroke hammer that reduces travel by roughly 20 percent over a standard SAA lockwork, giving faster, positive cocking and an uninterrupted sight picture between shots. A custom-grade mainspring encased in the checkered one-piece walnut grip delivers a smooth, crisp trigger pull tuned for rapid fire on steel. The six-shot fluted cylinder, blued steel frame, fixed sights and traditional loading gate preserve the handling and profile of the original frontier revolver while the internal refinements optimize it for speed shooting. Offered with 4.75-inch and 5.5-inch barrels in .357 Magnum and .45 Colt, the SASS Pro is aimed at serious competitors seeking a match-ready single action out of the box.
Founded in 1959 by Aldo Uberti, A. Uberti became the world's foremost maker of faithful Old West firearm reproductions. The Short Stroke SASS Pro was developed alongside the growth of cowboy action shooting, packaging the race-tuned lockwork that top competitors once had custom-fitted into a factory revolver ready for the firing line.
Competition variant of the Uberti 1873 Cattleman family, developed for SASS cowboy action shooting. Factory finish: blued; case-hardened frame offered on some models. MSRP approximately $849.
Specification
Everything measured
IdentityWhat it is, who built it and when.
- Manufacturer
- A. Uberti
- Category
- Revolver
- Country
- Italy
- Status
- In production
DimensionsAs issued, without a magazine or an optic.
- Barrel
- 121 mm
- Overall length
- 260 mm
- Height
- 135 mm
- Width
- 40 mm
- Weight, empty
- 1.04 kg
ActionHow it cycles, what trips it, and what feeds it.
- Action
- Single action
- Firing mechanism
- Single action
- Trigger
- Single action
- Capacity
- 6
- Magazine
- Rotary
MaterialsEach swatch is the material itself, not a colour chosen to stand for it.
- Frame
- Steel
- Barrel
- Steel
- Stock
- Walnut
- Finish
- Blued
BallisticsFrom the service cartridge, not a handload.
- Effective range
- 45 m
Trajectory
What the round does downrange
Solved from the muzzle figures and the bullet. The dashed rule is the effective range on the record, and the crosses are the steps the solver returned.
Features
What it has
What the record lists as fitted, drawn from the catalogue.
Short stroke hammer
Fluted cylinder
One piece walnut grip
Checkered grip- Custom grade mainspring
Fixed sights
Exposed hammer
Loading gate
Standing
How it compares
Each figure against the firearms of the same type and cartridge that record it, or of the same type where that cartridge has too few. Positions are read to the nearest tenth.
| Measurement | This firearm | Median | Position |
|---|---|---|---|
| Empty weightAmong 53 .357 Magnum revolvers | 1.04 kg | 1.10 kg | Lighter than about 60% |
| Overall lengthAmong 50 .357 Magnum revolvers | 260 mm | 245 mm | Longer than about 60% |
| Barrel lengthAmong 53 .357 Magnum revolvers | 121 mm | 107 mm | Longer than about 60% |
| Magazine capacityAmong 53 .357 Magnum revolvers | 6 | 6 | Near the median |
Answers
Questions about the Uberti Cattleman SASS Pro
How much does the Uberti Cattleman SASS Pro weigh?
The Uberti Cattleman SASS Pro weighs 1.04 kg (2.30 lb) empty.
What caliber is the Uberti Cattleman SASS Pro?
The Uberti Cattleman SASS Pro is chambered in .357 Magnum.
How many rounds does the Uberti Cattleman SASS Pro hold?
The Uberti Cattleman SASS Pro holds 6 rounds, fed from a rotary magazine.
How long is the Uberti Cattleman SASS Pro?
The Uberti Cattleman SASS Pro is 260 mm (10.24 in) long overall, with a 121 mm (4.76 in) barrel.
Who makes the Uberti Cattleman SASS Pro?
The Uberti Cattleman SASS Pro is made by A. Uberti (Italy).
How does the Uberti Cattleman SASS Pro operate?
The Uberti Cattleman SASS Pro uses a single action, and its firing mechanism is single action.
Compatibility
Which parts fit this firearm
Studio
Every part that mounts on this, resolved
Not a list the maker typed out: the answer comes from the mounts this firearm exposes and the interface each part needs, so it stays right when either one changes.
- Every part that mounts on any firearm in the catalogue
- Interface standards, platforms and fit overrides
- The same answers through the API and the MCP server
Requires a signed-in GunSpec account on the Studio plan. The answer is computed per part, so it is not part of the public record.
Provenance
What the record holds
Every figure above was taken from one of these pages. The confidence reflects how much of the record came from a page a claim can be checked against.
Provenance
Confidence in this record
70%
Stockists
Where to buy
Offers link straight to the shop. GunSpec never takes the order.
No shop has listed this firearm yet
Stock and prices come from the shops themselves. If you sell this firearm, you can list it and it appears here.
List a firearmMCP
Ask an assistant about it
The same record, reached the way a person asks for it rather than the way a program does.
Ask GunSpec
Works with
Point an MCP client at GunSpec and it answers from the catalogue rather than from memory. A free key covers the read tools.
API
The call that returns this record
The same fields, in the same units, from the same endpoint the page reads.
curl --request GET \ --url 'https://api.gunspec.io/v1/firearms/uberti-cattleman-sass-pro' \ --header 'X-API-Key: your_key'{ "id": "uberti-cattleman-sass-pro", "name": "Uberti Cattleman SASS Pro", "manufacturer": { "id": "uberti", "name": "A. Uberti", "countryCode": "IT", "foundedYear": 1959, "website": "https://www.uberti-usa.com", "logoUrl": null, "description": "Italian maker of reproduction historical firearms, founded 1959. Manufactured in Gardone Val Trompia, Italy. Owned by Beretta Holding since 2000.", "status": null, "defunctYear": null, "stateOwned": null, "makesFirearms": null, "parentId": null, "predecessorId": null, "createdAt": "2026-02-18 03:40:48", "updatedAt": "2026-02-18 03:40:48", "version": "febb6d9d105b602772dc6525221c8f71eb87fba0a4044a2c475c8a7c9b8b2213" }, "category": { "id": "revolver", "name": "Revolver", "description": "Handguns with a revolving cylinder containing multiple chambers" }, "country_of_origin": "IT", "year_introduced": null, "barrel_length_mm": 121, "weight_empty_g": 1043, "action_type": "single_action"}