A. Uberti Patton
- Category
- Revolver
- Barrel
- 121 mm
- Weight, empty
- 1.02 kg
- Introduced
- Not recorded
About
What it is, and why it matters
The Uberti Patton is an Outlaws & Lawmen series revolver inspired by General Patton's famous ivory-gripped SAA, chambered in .45 ACP with a nickel finish and simulated ivory grips.
.45 ACP. 4.75" barrel. Simulated ivory grips.
Specification
Everything measured
IdentityWhat it is, who built it and when.
- Manufacturer
- A. Uberti
- Category
- Revolver
- Country
- Italy
- Status
- In production
- Variant of
- Outlaw lawman
DimensionsAs issued, without a magazine or an optic.
- Barrel
- 121 mm
- Overall length
- 260 mm
- Weight, empty
- 1.02 kg
ActionHow it cycles, what trips it, and what feeds it.
- Action
- Single action revolver
- Firing mechanism
- Hammer fired
- Trigger
- Single action
- Capacity
- 6
- Magazine
- Revolving cylinder
MaterialsEach swatch is the material itself, not a colour chosen to stand for it.
- Frame
- Steel
- Barrel
- Steel
- Finish
- Nickel
BallisticsFrom the service cartridge, not a handload.
- Effective range
- 50 m
Trajectory
What the round does downrange
Solved from the muzzle figures and the bullet. The dashed rule is the effective range on the record, and the crosses are the steps the solver returned.
Features
What it has
What the record lists as fitted, drawn from the catalogue.
Single action
Nickel finish
Simulated ivory grips
Standing
How it compares
Each figure against the firearms of the same type and cartridge that record it, or of the same type where that cartridge has too few. Positions are read to the nearest tenth.
| Measurement | This firearm | Median | Position |
|---|---|---|---|
| Empty weightAmong 404 revolvers | 1.02 kg | 1.05 kg | Near the median |
| Overall lengthAmong 415 revolvers | 260 mm | 260 mm | Near the median |
| Barrel lengthAmong 431 revolvers | 121 mm | 127 mm | Near the median |
| Magazine capacityAmong 434 revolvers | 6 | 6 | Holds more rounds than about 60% |
Answers
Questions about the A. Uberti Patton
How much does the A. Uberti Patton weigh?
The A. Uberti Patton weighs 1.02 kg (2.25 lb) empty.
What caliber is the A. Uberti Patton?
The A. Uberti Patton is chambered in .45 ACP.
How many rounds does the A. Uberti Patton hold?
The A. Uberti Patton holds 6 rounds, fed from a revolving cylinder.
How long is the A. Uberti Patton?
The A. Uberti Patton is 260 mm (10.24 in) long overall, with a 121 mm (4.76 in) barrel.
Who makes the A. Uberti Patton?
The A. Uberti Patton is made by A. Uberti (Italy).
How does the A. Uberti Patton operate?
The A. Uberti Patton uses a single action, and its firing mechanism is hammer fired.
Compatibility
Which parts fit this firearm
Studio
Every part that mounts on this, resolved
Not a list the maker typed out: the answer comes from the mounts this firearm exposes and the interface each part needs, so it stays right when either one changes.
- Every part that mounts on any firearm in the catalogue
- Interface standards, platforms and fit overrides
- The same answers through the API and the MCP server
Requires a signed-in GunSpec account on the Studio plan. The answer is computed per part, so it is not part of the public record.
Provenance
What the record holds
Every figure above was taken from one of these pages. The confidence reflects how much of the record came from a page a claim can be checked against.
Provenance
Confidence in this record
70%
Stockists
Where to buy
Offers link straight to the shop. GunSpec never takes the order.
No shop has listed this firearm yet
Stock and prices come from the shops themselves. If you sell this firearm, you can list it and it appears here.
List a firearmMCP
Ask an assistant about it
The same record, reached the way a person asks for it rather than the way a program does.
Ask GunSpec
Works with
Point an MCP client at GunSpec and it answers from the catalogue rather than from memory. A free key covers the read tools.
API
The call that returns this record
The same fields, in the same units, from the same endpoint the page reads.
curl --request GET \ --url 'https://api.gunspec.io/v1/firearms/uberti-patton' \ --header 'X-API-Key: your_key'{ "id": "uberti-patton", "name": "A. Uberti Patton", "manufacturer": { "id": "uberti", "name": "A. Uberti", "countryCode": "IT", "foundedYear": 1959, "website": "https://www.uberti-usa.com", "logoUrl": null, "description": "Italian maker of reproduction historical firearms, founded 1959. Manufactured in Gardone Val Trompia, Italy. Owned by Beretta Holding since 2000.", "status": null, "defunctYear": null, "stateOwned": null, "makesFirearms": null, "parentId": null, "predecessorId": null, "createdAt": "2026-02-18 03:40:48", "updatedAt": "2026-02-18 03:40:48", "version": "febb6d9d105b602772dc6525221c8f71eb87fba0a4044a2c475c8a7c9b8b2213" }, "category": { "id": "revolver", "name": "Revolver", "description": "Handguns with a revolving cylinder containing multiple chambers" }, "country_of_origin": "IT", "year_introduced": null, "barrel_length_mm": 121, "weight_empty_g": 1020, "action_type": "single_action_revolver"}