Victrix Tormento
- Category
- Sniper Rifle
- Barrel
- 762 mm
- Weight, empty
- 11.50 kg
- Introduced
- 2020
About
What it is, and why it matters
The Victrix Tormento is an Italian extreme long-range bolt-action sniper rifle chambered in .408 CheyTac (and .375 CheyTac), built by Victrix Armaments for expert marksmen engaging targets at extreme distances. It uses a billet-milled AISI 420 steel action with a three-lug bolt set at 120 degrees, a 30-inch fluted match-grade button-rifled barrel, integrated 45 MOA rails, an adjustable folding chassis stock with retractable monopod, and a single-stack 7-round polymer magazine.
Victrix Armaments, based in Vigevano, Italy, is part of the Beretta Holding group and specializes in high-end precision and extreme-long-range rifles used in ELR competition shooting.
Also marketed as the Tormentum. The Tormento V is an extreme-ELR competition configuration with a longer barrel.
Specification
Everything measured
IdentityWhat it is, who built it and when.
- Manufacturer
- Victrix Armaments
- Category
- Sniper Rifle
- Country
- Italy
- Status
- In production
- Produced
- 2020
DimensionsAs issued, without a magazine or an optic.
- Barrel
- 762 mm
- Overall length
- 1201 mm
- Weight, empty
- 11.50 kg
ActionHow it cycles, what trips it, and what feeds it.
- Action
- Bolt action
- Firing mechanism
- Striker fired
- Trigger
- Two stage
- Trigger pull
- 10.0 N
- Capacity
- 7
- Magazine
- Detachable box
MaterialsEach swatch is the material itself, not a colour chosen to stand for it.
- Frame
- Steel
- Barrel
- Steel
- Stock
- Aluminum
- Finish
- Cerakote
BallisticsFrom the service cartridge, not a handload.
- Muzzle velocity
- 839 m/s
- Muzzle energy
- 9574 J
- Effective range
- 2500 m
Trajectory
What the round does downrange
Solved from the muzzle figures and the bullet. The dashed rule is the effective range on the record, and the crosses are the steps the solver returned.
No load solved for this record yetThe flight path is computed from a cartridge and a bullet. This record has no ammunition filed against its chambering, so there is nothing to solve.
Features
What it has
What the record lists as fitted, drawn from the catalogue.
Fluted match barrel
Muzzle brake
Folding stock
Adjustable cheek piece
Retractable monopod
Integrated 45 moa rail
Three lug bolt
Pvd coated action
Standing
How it compares
Each figure against the firearms of the same type and cartridge that record it, or of the same type where that cartridge has too few. Positions are read to the nearest tenth.
| Measurement | This firearm | Median | Position |
|---|---|---|---|
| Empty weightAmong 430 sniper rifles | 11.50 kg | 5.40 kg | Heavier than about 90% |
| Overall lengthAmong 429 sniper rifles | 1201 mm | 1150 mm | Longer than about 70% |
| Barrel lengthAmong 434 sniper rifles | 762 mm | 620 mm | Longer than about 90% |
| Magazine capacityAmong 434 sniper rifles | 7 | 6 | Near the median |
Answers
Questions about the Victrix Tormento
How much does the Victrix Tormento weigh?
The Victrix Tormento weighs 11.50 kg (25.35 lb) empty.
What caliber is the Victrix Tormento?
The Victrix Tormento is chambered in .408 CheyTac and .375 CheyTac.
How many rounds does the Victrix Tormento hold?
The Victrix Tormento holds 7 rounds, fed from a detachable box magazine.
How long is the Victrix Tormento?
The Victrix Tormento is 1201 mm (47.3 in) long overall, with a 762 mm (30.0 in) barrel.
Who makes the Victrix Tormento?
The Victrix Tormento is made by Victrix Armaments (Italy). It was designed by Victrix Armaments.
When was the Victrix Tormento introduced?
The Victrix Tormento was introduced in 2020.
How does the Victrix Tormento operate?
The Victrix Tormento uses a bolt action, and its firing mechanism is striker fired.
Compatibility
Which parts fit this firearm
Studio
Every part that mounts on this, resolved
Not a list the maker typed out: the answer comes from the mounts this firearm exposes and the interface each part needs, so it stays right when either one changes.
- Every part that mounts on any firearm in the catalogue
- Interface standards, platforms and fit overrides
- The same answers through the API and the MCP server
Requires a signed-in GunSpec account on the Studio plan. The answer is computed per part, so it is not part of the public record.
Provenance
What the record holds
Every figure above was taken from one of these pages. The confidence reflects how much of the record came from a page a claim can be checked against.
Provenance
Confidence in this record
82%
Stockists
Where to buy
Offers link straight to the shop. GunSpec never takes the order.
No shop has listed this firearm yet
Stock and prices come from the shops themselves. If you sell this firearm, you can list it and it appears here.
List a firearmMCP
Ask an assistant about it
The same record, reached the way a person asks for it rather than the way a program does.
Ask GunSpec
Works with
Point an MCP client at GunSpec and it answers from the catalogue rather than from memory. A free key covers the read tools.
API
The call that returns this record
The same fields, in the same units, from the same endpoint the page reads.
curl --request GET \ --url 'https://api.gunspec.io/v1/firearms/victrix-tormento' \ --header 'X-API-Key: your_key'{ "id": "victrix-tormento", "name": "Victrix Tormento", "manufacturer": { "id": "victrix-armaments", "name": "Victrix Armaments", "countryCode": "IT", "foundedYear": 2010, "website": "https://www.victrixarmaments.com", "logoUrl": null, "description": null, "status": "active", "defunctYear": null, "stateOwned": null, "makesFirearms": true, "parentId": null, "predecessorId": null, "createdAt": "2026-04-05 22:24:37", "updatedAt": "2026-04-05 22:24:37", "version": "e90fe7f27e18f51a9fa8d5df5770c2f62de48d0d4292cb35f78384b1000f9166" }, "category": { "id": "sniper-rifle", "name": "Sniper Rifle", "description": "Precision rifles optimized for long-range accuracy" }, "country_of_origin": "IT", "year_introduced": 2020, "barrel_length_mm": 762, "weight_empty_g": 11500, "action_type": "bolt_action"}