Bond Arms DT47
- Category
- Pistol
- Barrel
- 108 mm
- Weight, empty
- 725 g
- Introduced
- 2026
About
What it is, and why it matters
The Bond Arms DT47 is a limited-edition commemorative double-barrel derringer introduced in 2026, chambered in .45 Colt/.410 with a 4.25-inch stainless-steel flat-sided barrel. Machined from solid stainless steel, it honors the inauguration of the 47th President of the United States, with both sides of the barrel deeply engraved and a Presidential-seal holster included. Like all Bond Arms derringers it is a two-shot, break-action pistol with interchangeable barrels, a B6 resin grip, fixed front blade and rear sights, a crossbolt safety, and a spring-loaded locking lever. It is offered in both rough and polished finishes.
The DT47's barrel is engraved on both sides and ships with a Presidential-seal holster, casting the pocket-sized two-shot derringer as a collector's tribute to the 47th U.S. president rather than a working defensive piece.
Marketed as the '47th President' / 'Living Legend' commemorative. MSRP approximately $645. Two-shot break-action; capacity field reflects the two chambers.
Specification
Everything measured
IdentityWhat it is, who built it and when.
- Manufacturer
- Bond Arms
- Category
- Pistol
- Country
- United States
- Status
- Limited production
- Produced
- 2026
DimensionsAs issued, without a magazine or an optic.
- Barrel
- 108 mm
- Overall length
- 159 mm
- Weight, empty
- 725 g
ActionHow it cycles, what trips it, and what feeds it.
- Action
- Double action
- Firing mechanism
- Single action
- Trigger
- Single action
- Capacity
- 2
MaterialsEach swatch is the material itself, not a colour chosen to stand for it.
- Frame
- Stainless steel
- Barrel
- Stainless steel
- Stock
- Resin
- Finish
- Bead blasted stainless
BallisticsFrom the service cartridge, not a handload.
- Effective range
- 7 m
Trajectory
What the round does downrange
Solved from the muzzle figures and the bullet. The dashed rule is the effective range on the record, and the crosses are the steps the solver returned.
No load solved for this record yetThe flight path is computed from a cartridge and a bullet. This record has no ammunition filed against its chambering, so there is nothing to solve.
Features
What it has
What the record lists as fitted, drawn from the catalogue.
Break action
Double barrel
Interchangeable barrels- Engraved barrel
B6 resin grip
Fixed sights- Presidential seal holster
Standing
How it compares
Each figure against the firearms of the same type and cartridge that record it, or of the same type where that cartridge has too few. Positions are read to the nearest tenth.
| Measurement | This firearm | Median | Position |
|---|---|---|---|
| Empty weightAmong 1,909 pistols | 725 g | 794 g | Lighter than about 60% |
| Overall lengthAmong 1,911 pistols | 159 mm | 196 mm | Shorter than about 80% |
| Barrel lengthAmong 1,941 pistols | 108 mm | 102 mm | Longer than about 60% |
| Magazine capacityAmong 1,962 pistols | 2 | 8 | Among the smallest capacities |
Answers
Questions about the Bond Arms DT47
How much does the Bond Arms DT47 weigh?
The Bond Arms DT47 weighs 725 g (1.60 lb) empty.
What caliber is the Bond Arms DT47?
The Bond Arms DT47 is chambered in .45 Colt.
How many rounds does the Bond Arms DT47 hold?
The Bond Arms DT47 holds 2 rounds.
How long is the Bond Arms DT47?
The Bond Arms DT47 is 159 mm (6.26 in) long overall, with a 108 mm (4.25 in) barrel.
Who makes the Bond Arms DT47?
The Bond Arms DT47 is made by Bond Arms (United States). It was designed by Gordon Bond.
When was the Bond Arms DT47 introduced?
The Bond Arms DT47 was introduced in 2026.
How does the Bond Arms DT47 operate?
The Bond Arms DT47 uses a double action, and its firing mechanism is single action.
Compatibility
Which parts fit this firearm
Studio
Every part that mounts on this, resolved
Not a list the maker typed out: the answer comes from the mounts this firearm exposes and the interface each part needs, so it stays right when either one changes.
- Every part that mounts on any firearm in the catalogue
- Interface standards, platforms and fit overrides
- The same answers through the API and the MCP server
Requires a signed-in GunSpec account on the Studio plan. The answer is computed per part, so it is not part of the public record.
Provenance
What the record holds
Every figure above was taken from one of these pages. The confidence reflects how much of the record came from a page a claim can be checked against.
Provenance
Confidence in this record
70%
Stockists
Where to buy
Offers link straight to the shop. GunSpec never takes the order.
No shop has listed this firearm yet
Stock and prices come from the shops themselves. If you sell this firearm, you can list it and it appears here.
List a firearmMCP
Ask an assistant about it
The same record, reached the way a person asks for it rather than the way a program does.
Ask GunSpec
Works with
Point an MCP client at GunSpec and it answers from the catalogue rather than from memory. A free key covers the read tools.
API
The call that returns this record
The same fields, in the same units, from the same endpoint the page reads.
curl --request GET \ --url 'https://api.gunspec.io/v1/firearms/bond-arms-dt47' \ --header 'X-API-Key: your_key'{ "id": "bond-arms-dt47", "name": "Bond Arms DT47", "manufacturer": { "id": "bond-arms", "name": "Bond Arms", "countryCode": "US", "foundedYear": 1995, "website": "https://www.bondarms.com", "logoUrl": null, "description": null, "status": null, "defunctYear": null, "stateOwned": null, "makesFirearms": null, "parentId": null, "predecessorId": null, "createdAt": "2026-02-18 03:40:42", "updatedAt": "2026-02-18 03:43:40", "version": "2d3052deaaef69c1999e05e095518b593a6c443f2924c16f3e2fedfbc455b454" }, "category": { "id": "pistol", "name": "Pistol", "description": "Handguns designed to be fired with one or two hands" }, "country_of_origin": "US", "year_introduced": 2026, "barrel_length_mm": 108, "weight_empty_g": 725, "action_type": "double_action"}