S&W M&P9 M2.0 Competitor HD
- Category
- Pistol
- Barrel
- 127 mm
- Weight, empty
- 978 g
- Introduced
- 2026
About
What it is, and why it matters
The Smith & Wesson Performance Center M&P9 M2.0 Competitor HD is a steel-framed, optics-ready 9mm competition pistol introduced in 2026. It pairs a stainless-steel frame with a 5-inch spiral-fluted stainless barrel and a lightened slide with aggressive serrations, plus an external magwell, extended magazine release, flat-faced trigger and HIVIZ front sight. It ships with four 17-round magazines.
Sits in the M&P M2.0 HD heavyweight line alongside the duty-oriented Metal HD. A no-thumb-safety configuration is offered. Weight approximately 34.5 oz. MSRP around $1,299.
Specification
Everything measured
IdentityWhat it is, who built it and when.
- Manufacturer
- Smith & Wesson
- Category
- Pistol
- Country
- United States
- Status
- In production
- Produced
- 2026
DimensionsAs issued, without a magazine or an optic.
- Barrel
- 127 mm
- Overall length
- 210 mm
- Height
- 140 mm
- Weight, empty
- 978 g
ActionHow it cycles, what trips it, and what feeds it.
- Action
- Short recoil
- Firing mechanism
- Striker fired
- Trigger
- Striker fired
- Capacity
- 17
- Magazine
- Detachable box
MaterialsEach swatch is the material itself, not a colour chosen to stand for it.
- Frame
- Stainless steel
- Slide
- Stainless steel
- Barrel
- Stainless steel
- Finish
- Armornite
BallisticsFrom the service cartridge, not a handload.
- Effective range
- 50 m
Trajectory
What the round does downrange
Solved from the muzzle figures and the bullet. The dashed rule is the effective range on the record, and the crosses are the steps the solver returned.
Features
What it has
What the record lists as fitted, drawn from the catalogue.
Steel frame
Optics ready
Spiral fluted barrel
Lightened slide
External magwell
Extended magazine release
Flat face trigger
Hiviz front sight
Standing
How it compares
Each figure against the firearms of the same type and cartridge that record it, or of the same type where that cartridge has too few. Positions are read to the nearest tenth.
| Measurement | This firearm | Median | Position |
|---|---|---|---|
| Empty weightAmong 560 9x19mm Parabellum pistols | 978 g | 765 g | Heavier than about 80% |
| Overall lengthAmong 559 9x19mm Parabellum pistols | 210 mm | 191 mm | Longer than about 80% |
| Barrel lengthAmong 569 9x19mm Parabellum pistols | 127 mm | 105 mm | Longer than about 90% |
| Magazine capacityAmong 571 9x19mm Parabellum pistols | 17 | 15 | Holds more rounds than about 80% |
Answers
Questions about the S&W M&P9 M2.0 Competitor HD
How much does the S&W M&P9 M2.0 Competitor HD weigh?
The S&W M&P9 M2.0 Competitor HD weighs 978 g (2.16 lb) empty.
What caliber is the S&W M&P9 M2.0 Competitor HD?
The S&W M&P9 M2.0 Competitor HD is chambered in 9x19mm Parabellum.
How many rounds does the S&W M&P9 M2.0 Competitor HD hold?
The S&W M&P9 M2.0 Competitor HD holds 17 rounds, fed from a detachable box magazine.
How long is the S&W M&P9 M2.0 Competitor HD?
The S&W M&P9 M2.0 Competitor HD is 210 mm (8.27 in) long overall, with a 127 mm (5.00 in) barrel.
Who makes the S&W M&P9 M2.0 Competitor HD?
The S&W M&P9 M2.0 Competitor HD is made by Smith & Wesson (United States).
When was the S&W M&P9 M2.0 Competitor HD introduced?
The S&W M&P9 M2.0 Competitor HD was introduced in 2026.
How does the S&W M&P9 M2.0 Competitor HD operate?
The S&W M&P9 M2.0 Competitor HD uses a short recoil action, and its firing mechanism is striker fired.
Compatibility
Which parts fit this firearm
Studio
Every part that mounts on this, resolved
Not a list the maker typed out: the answer comes from the mounts this firearm exposes and the interface each part needs, so it stays right when either one changes.
- Every part that mounts on any firearm in the catalogue
- Interface standards, platforms and fit overrides
- The same answers through the API and the MCP server
Requires a signed-in GunSpec account on the Studio plan. The answer is computed per part, so it is not part of the public record.
Provenance
What the record holds
Every figure above was taken from one of these pages. The confidence reflects how much of the record came from a page a claim can be checked against.
Provenance
Confidence in this record
84%
Stockists
Where to buy
Offers link straight to the shop. GunSpec never takes the order.
No shop has listed this firearm yet
Stock and prices come from the shops themselves. If you sell this firearm, you can list it and it appears here.
List a firearmMCP
Ask an assistant about it
The same record, reached the way a person asks for it rather than the way a program does.
Ask GunSpec
Works with
Point an MCP client at GunSpec and it answers from the catalogue rather than from memory. A free key covers the read tools.
API
The call that returns this record
The same fields, in the same units, from the same endpoint the page reads.
curl --request GET \ --url 'https://api.gunspec.io/v1/firearms/smith-wesson-mp-m2-0-competitor-hd' \ --header 'X-API-Key: your_key'{ "id": "smith-wesson-mp-m2-0-competitor-hd", "name": "S&W M&P9 M2.0 Competitor HD", "manufacturer": { "id": "smith-wesson", "name": "Smith & Wesson", "countryCode": "US", "foundedYear": 1852, "website": "https://www.smith-wesson.com", "logoUrl": null, "description": null, "status": null, "defunctYear": null, "stateOwned": null, "makesFirearms": null, "parentId": null, "predecessorId": null, "createdAt": "2026-02-11 23:44:40", "updatedAt": "2026-02-18 03:40:48", "version": "6e259a578cb1b21d72610d761d652c983ff25806b9e736e2db8d2938596e9202" }, "category": { "id": "pistol", "name": "Pistol", "description": "Handguns designed to be fired with one or two hands" }, "country_of_origin": "US", "year_introduced": 2026, "barrel_length_mm": 127, "weight_empty_g": 978, "action_type": "short_recoil"}